Services & CapabilitiesCustom CNC Turning,
Milling & Routing of Plastics
Custom Precision Plastic
Fabrication Services
Custom Urethane Casting, Compression & RIM
Molding Services
Custom Design & Manufacturing Vacuum
Form Molding Services
Rigid & Flexible Polyurethane Foam Services
Example ProjectsCNC Milling of
PTFE Fixture Inserts
CNC Turning of an
Acetal Pulley
CNC Machining of a Nylon Conduit Housing UnitOvermolding & CNC Machining of a Pulley Outer Drive AssemblyBending & Bonding of a Pill Dispenser Polycarbonate ComponentsManufacturing of a
Derlin Knife Body
CNC Turning of a Blue
PVC Seal-Lifted Shaft
Printable PagePrintable Page Email This PageEmail This Page

Custom CNC Machining of a Nylon Plastic Part

This nylon machined part is used within a food processing application and was fabricated utilizing our precision CNC machining capabilities. Composed of a USDA approved blue cast nylon, the finished product had to meet many critical dimensional specifications such as parallelism of .02”, perpendicularity of .01”, and circular runout of .03”. The part also required the use of CNC turning of the inside and outside diameter and groove, as well as CNC milling of the outside profile, including drilling and tapping.

The finished size of the Nylon Machined Part is 16.25” in length, 6.88” in height, which featured an outside diameter of 4.50” to 5.50” and an inside diameter of 3.50” to 3.56”, and met tolerances of +.005”/.000”.

For more information on this project see the table below or contact us directly.

  CNC Machining of a Nylon Conduit Housing

[click to enlarge]
CNC Machining of a Nylon Conduit Housing
Request a Quote

Highlights of this Custom CNC Machining of a Nylon Machined  Project

Product Description Nylon Part for a food processing application.
Custom CNC Machining Capabilities Applied/Processes CNC Turning
  • Turn OD
  • Groove OD
  • Turn ID
  • Groove ID
CNC Milling
  • Mill Outside Profile
  • Drill & Tap
Equipment Used to Manufacture Part CNC Lathe
CNC Mill
Overall Part Dimensions Length: 16.25”
Height: 6.88”
O.D.: Ø4.50 to 5.50”
I.D.: Ø3.50” to 3.56”
Tightest Tolerances +.005”/-.000”
Parallelism of .02”
Perpendicularity of .01”
Circular Runout of .03”
Flatness of .01”
Material Used USDA Approved Nylon
In process testing/inspection performed First Article
Industry for Use Food Processing
Volume 20-500
Standards Met Customer supplied print, 2D CAD Drawing
Product Name Nylon Part
View Other Adapt Plastics Projectsback to top